1/4'' Stainless Steel Tubing for Push Lock (3 ft Section)
1/4'' Stainless Steel Tubing for Push Lock (3 ft Section) by Mistcooling at Milbal. Hurry! Limited time offer. Offer valid only while supplies last. • With lifetime warranty, Stainless Steel tubing is the best choice for your misting system. • Each section is pre-cut and grooved at each end
• With lifetime warranty, Stainless Steel tubing is the best choice for your misting system. • Each section is pre-cut and grooved at each end for leak proof connection with push lock fittings. Rated for 2000PSI. • Available in 1ft, 2ft, 3ft, 4ft, 10ft and custom length sections.
Features & Highlights
- • 1/4'' Blank Stainless Steel Tube Sections For Push Lock Fittings - • Pre-Cut and Grooved
- • Lifetime Warranty - Precut and Grooved - • Rigid Stainless Steel (can be bent) - Multiple Sizes - Custom Lengths available
- • Rated at 2000PSI - Rust Proof Stainless Steel - Size: 1/4''
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Mistcooling, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Misting Direct
Misting Direct's high quality misting nozzles were designed to create an extremely fine mist. Our top of the line ruby nozzles with synthetic ruby orifices have more uniform orifices than nozzles with a stainless steel center. All of our nozzles can ...
Turn on the water tap to wash the system for 1 minute to purge the system and remove any impuritiesScrew the misting nozzles to the Tee fittings, except the last one on the end plugTurn on the water tap to wash the system for 2 minutes to insure that...
● Mist spray nozzle is applied the low-pressure thoery, the spraying liquid could be runing water ; ● The misting performance is excellent. This type of nozzle is applicated in the low pressure fog- making.● Material is brass, stainless steel ...
This Slip-Lock End misting coupling (two hole) has a durable brass mist nozzle and works with both low and high pressure misting systems. The Slip-Lock fitting works with 3/8-inch nylon mist tubing and assembles in just minutes for quick installation...
By Arctic Cove
mpn: MAC870, ean: 0033287168200,
The Arctic Cove High Pressure 2 ft. Stainless Steel Tubing (3-Pack) accessory is the perfect way to extend your existing misting system. This stainless steel tubing is 3/8 in. in diameter. Best of all this tubing will work with all 3/8 in. misting sy...
This complete commercial filter kit is compatible with all mist pumps. Includes Filter Housing, 6 Month Sediment Cartridge, Inlet/Outlet Fittings, Mounting Bracket and 1ft Hose. Can be expanded with add-on secondary filter.• Features • Complete F...
mpn: 10107L, ean: 0816602028362,
Misting systems that are most effective need brass mist plugs that replace brass mist nozzles in the off season when the misting system is not in use and the mist nozzles are being stored. Orbit Brass Nozzle Mist system nozzle plugs prevent debris an...
This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage. It is used a sturdy brass body with stainless steel orifi...
Operation pressure: 20-70 kg/cm Application: Textile mill can use 0.1mm or 0.15mm orifice, Farm can use 0.2mm orifice, Landscape fog making can use 0.3mm-0.5mm orifice; Flow rate: 0.1mm orifice, 10-25cc/min; 0.15mm orifice, 20-46cc/min; 0.2mm ori...
This push to connect cross fitting is used to connect and branch four tubings, It is made of nickel plated for high pressure and anti corrosion.It is uitable for high pressure PE, nylon, alloy, stainless steel tubing and more.Cross for connecting and...